DEFROSTING GAP

How do you modify the defrosting gaps?

- Start the programming Select the IdF parameter Set the gap between the 2 following defrosting

DISPLAY READING IS UNSTABLE

How to proceed if the display is unstable?

- Check that the probes are far from the power cables
- Check the voltage in the electric system
- Check if there are devices with high electromagnetic emission around (aerial, repeater, etc.)

- Check that the probes are far from the power cables
- Check the voltage in the electric system
- Check if there are devices with high electromagnetic emission around (aerial, repeater, etc.)

START THE PROMMAMING

Which is the procedure to follow in order to start the programmino in the instruments 32x74mm / Din-Rail / 72x72mm?

- Hold both "SET" and "Down Arrow" keys for 3 seconds

THE DEVICE DOESN’T START

How to procede if the device doesn’t start?

- Check if the voltage in your electrical system is the same of the one reported in the label
- Check with the multimeter that the transformer gives continuity
- Check the connecting terminal